Inventory
How to run a stock count you can trust, step by step
Freeze the place, count blind, recount the big gaps, and give every difference a name before you post a single dirham.
To run a stock count, pick a time when nothing moves and stop receipts, sales and transfers at that place. Count every item by place and by lot, without seeing what the system expects. Then recount the big differences, find the cause of each, fix what was missed at its source, and post the rest as an adjustment at cost, with a reason.
Full count or cycle count: which do you need?
Both, for different jobs. A full count covers every item at one place in one go. You do it at month-end or year-end, when the books need a number you can trust.
A cycle count covers a small part each week: one shelf, one category or a few items. Count expensive, fast-moving items most often (coffee, milk, cups) and slow ones once a quarter.
Cycle counts catch a problem while it's a week old, and make the full count shorter. Our guide to inventory management for small businesses has more on how often to count.
When should you count, and what is a cut-off?
Count when nothing is moving: after closing, before opening, or on the last day of the month once the till has closed at midnight, as part of your month-end close. The cut-off is the moment the count describes. Everything before it is in the system, and everything after it waits.
- Make sure every sale up to the cut-off has reached the system before you start.
- Receive everything that arrived. A delivery left on the floor unreceived will show as an overage.
- Put anything that arrives during the count to one side, labelled, and receive it afterwards.
- Finish or pause transfers and production. Stock on a van between two places is counted once: not twice, and not missed.
Why shouldn't counters see the expected quantity?
Because people find what they're told to look for. Tell a counter the system expects 41 bags, and 38 becomes 41 after a quick second look. In a blind count, counters see only the item and the place, so you get what is on the shelf.
For valuable items, use two people: one counts, one writes, and they swap halfway. Never let the person who runs the stock day to day be the only one who counts it.
How do you count by place and by lot?
One place at a time, shelf by shelf, in the order the shelves stand, so nothing is counted twice or skipped. Within each place, count each lot on its own, with its expiry date. Then:
- Count in the unit the system uses. If it holds kilos, weigh the open sack instead of writing half a sack. If cups are kept as single cups, multiply out the sleeves.
- Separate what can't be sold. Damaged or expired stock is counted, then recorded as waste with its reason, not left sitting in the stock.
- Leave out what isn't yours. A customer's order, packed and paid for and waiting for collection, is no longer your stock.
What do you do when the count doesn't match?
Recount first. Before you start, set a threshold, such as any line more than 2% or AED 100 out, and have someone else recount those lines. Many differences disappear here: a box behind a box, or a sleeve counted as one cup.
For what's left after the recount, check these causes, most likely first:
- Missed receipts. Goods put away but never received in the system. The count comes out over.
- Unrecorded waste. Spilt milk, shots poured away while dialling in the grinder, a dropped bag. The count comes out short. Our guide to reducing waste covers how to record it as it happens.
- Wrong units. Sleeves for cups, sacks for kilos, on the count or on the original receipt.
- Transfers recorded on one side. Sent but never received, or moved with no record at all.
- Theft. Last, once the rest are ruled out. Most shortages come from how the work is done, and accusing a team over a missed receipt costs more than the stock.
How to run a stock count: a worked example
In an invented example, the Marina branch counts after closing on 31/10/2026. These are five lines from the sheet, after the recount, valued at each item's average cost in AED.
| Item | Expected | Counted | Difference | Cost each | AED |
|---|---|---|---|---|---|
| Whole milk, litres | 120 | 112 | −8 | 4.80 | −38.40 |
| Oat milk, litres | 48 | 60 | +12 | 12.00 | +144.00 |
| Coffee, 250 g bags | 41 | 38 | −3 | 16.53 | −49.59 |
| Espresso blend, kg | 6.0 | 5.2 | −0.8 | 61.33 | −49.06 |
| Cups with lids | 1,500 | 1,500 | 0 | 0.65 | 0.00 |
| Net | +6.95 |
The net is AED 6.95 over, which looks like a good count. But the lines moved by 38.40 + 144.00 + 49.59 + 49.06 = AED 281.05 in all, and the net hides almost all of it. Here is what each line was:
- Oat milk, +12. Thursday's delivery on 29/10/2026 was put away and never received. The fix is to receive it, so the supplier's bill matches, not to adjust it.
- Whole milk, −8, and espresso blend, −0.8 kg. A crate spilt on 25/10/2026, and dial-in shots poured away. Both are waste, recorded with their reason: 38.40 + 49.06 = AED 87.46.
- Cups, 0. The first count said 30, because the counter counted sleeves of 50. The recount caught it.
- Coffee bags, −3. No one could explain them after the recount. AED 49.59 is posted as an unexplained count loss, and the bags go on next week's cycle count.
How do you post the adjustment?
Fix the source first, then adjust. Receive the missed delivery, record the transfer, record the waste with its reason. Only what's left after that is a count adjustment.
Post it at cost, never at selling price: three bags short is AED 49.59 of stock gone, not the AED 225.00 on their price tags. Give every line a reason, and have someone who didn't count approve it.
The adjustment lowers the value of your stock and shows as a cost in that month's results, so it belongs to the month it was found.
In Seyaqi a count is counted, reviewed and approved before anything posts. Staff can't approve a count they made themselves, and the differences post at each item's real cost.
What should the variance report teach you?
One count shows a single moment. Three in a row show a pattern, and the pattern is what matters:
- Short on the same item every month. This points to a habit: waste no one records, or a recipe that has drifted. A dose 2 g over on every cup loses 0.8 kg of coffee every 400 cups. See what a cup really costs.
- Overages. These almost always come from receiving. Fix the habit at the back door, not in the count.
- Differences that cluster. Same shift, same place, same person on duty. That's when to look closer, calmly, with the facts in hand.
- Unit mistakes. Print the counting unit next to every item on the sheet.
Then shrink the list, month by month. The goal is a count where every difference is explained. A count with no differences at all is rare, and usually means no one looked closely.
Seyaqi keeps stock by place and by lot, so a count compares like with like. Waste is recorded with a reason, a name and a signature, so the next count has fewer unexplained gaps. See how Seyaqi runs stock, or book a demo.
Common questions
How often should a small business do a stock count?
A full count at each month-end, with smaller cycle counts in between, suits most small businesses. Count costly, fast-moving items such as coffee, milk and packaging every week, and slow items once a quarter. Differences found early are easier to trace.
What is a blind stock count?
In a blind count, the counters see each item and its place but not the expected quantity. They cannot look for a number they were given, so the count shows what is on the shelf.
What causes stock count variances?
The usual causes are deliveries put away but never received, unrecorded waste, counts in the wrong unit, and transfers recorded on one side only. Consider theft last, once the others are ruled out.
Should stock adjustments be valued at cost or selling price?
At cost: a shortage is the cost of the stock that has gone. Use the same cost your stock is valued at, such as its weighted average. Give every adjustment line a reason and an approval.
Every number in your business, in context.
Seyaqi runs stock, production, purchasing, sales, people and the books in one system, with an AI Advisor that reads it all every night and tells you what needs you.
Read next
- Inventory Weighted average cost vs FIFO: which fits your stock? Three deliveries at rising prices, costed both ways, and why the shelf follows a different rule from the books. 5 min read
- Inventory Inventory management for small businesses in the UAE Four questions every stock record must answer, how to answer them place by place and lot by lot, and the signs yours have stopped telling the truth. 5 min read
- Finance Aged receivables report: how to read it and collect What the age columns tell you, and a weekly routine that turns overdue invoices into cash. 4 min read